Tuesday, December 27, 2011
La Diva PTU Tut
Any resemblance to any other tutorial or signature is merely coincidental and is not intended.
I am using the artwork of Pete Tapang
I am using the artwork of Pete Tapang
I am using the font: Duchess
I am using plugins:,
Pieces of the kit used in this tutorial are
Paper 2
Glitter Paper 3
Element 28
Element 11
Element 8
Element 7
Element 12
You must have working knowledge of PSP to complete this tutorial. This tutorial was written using PSPXII
Open new Canvas 600*600
You must have working knowledge of PSP to complete this tutorial. This tutorial was written using PSPXII
Open new Canvas 600*600
Open Paper 2 and resize to 600*600. Paste apply mask and resize to your liking, Merge Group,
Open Element 28 c/p to canvas, resize to your liking.
Open Glitter paper 3, resize to 600*600. Paste under your frame, using your Magic Wand, select the inside of your frame, go to Selections, Modify, Expand, 3 pixels. Select okay, invert selection and delete leaving the inside of the frame with your paper.
Take your tube and paste it on top of the frame. Use the wand to select the outside of Element28, and erase the bits of the tube so it looks like she’s over the frame. Apply Lokas 3D effect
Element 11, resize and place to your liking
Element 8, resize and place to your liking
Element 7 resize and place to your liking
Element 12, resize and place to your liking
Apply drop shadow to your taste. Mine are all 2*2’s
Resize the signature if needed
The name. Using Duchess Size 24
Drop Shadow to your liking
Add your copyright information and license number before save
New FTU Kit Golden Nights
Any resemblance to any other tutorial or signature is merely coincidental and is not intended.
I am using the artwork of Tony Tzanoukakis You can purchase his artwork and a license to use them HERE you MUST have a license to her her work
I am using the artwork of Tony Tzanoukakis You can purchase his artwork and a license to use them HERE you MUST have a license to her her work
I am using the font: Ali Baba
I am using plugins:, Lokas 3-D Shadow, Eye Candy 4.0, Xenofex Constellation
I am using New Years 2012 Mask 1 from Cookies Kreative Corner you can get that here
Pieces of the kit used in this tutorial are
PP4
PP8
Rectangle Frame
Heart Scatter
Clock
Hanging Heart Dangly
Sequined Bowtie
Flower Swag
Fancy Mask
Bottle
Glass
You must have working knowledge of PSP to complete this tutorial. This tutorial was written using PSPXII
Open new Canvas 600*600
Open PP4 and resize to 600*600. Paste apply mask and resize to your liking, Merge Group,
Open Rectangle Frame c/p to canvas, resize to your liking.
Open PP8, resize to 600*600. Paste under your frame, using your Magic Wand, select the inside of your frame, go to Selections, Modify, Expand, 3 pixels. Select okay, invert selection and delete leaving the inside of the frame with your paper.
Use the close up of your tube, pasted under the frame, use wand to select the outside of PP8, invert and delete the bits of the tube you don’t’ want. Apply Luminance legacy. Drop shadow.
Use the full tube, paste and place to your liking, apply Lokas 3-D shadow
Heart Scatter, resize, and place to your liking
Clock, resize to your liking and place
Hanging Heart Dangly resize and place to your liking
Sequined Bowtie resize and place to your liking, over the top of the dangly
Flower Swag, resize and place to your liking
Fancy Mask, resize and place to your liking
Bottle, resize and place to your liking
Glass resize, and place to your liking
Apply drop shadow to your taste. Mine are all 2*2’s
Resize the signature if needed
The name. Using Ali Baba size 26, Apply Eye Candy 4.0, Chrome, Bronze. Xenofex, Constellation
Drop Shadow to your liking
Add your copyright information and license number before save
Thursday, December 15, 2011
FAB December Blog Train
Tuesday, November 29, 2011
PTU Emerald Princess Tut
Any resemblance to any other tutorial or signature is merely coincidental and is not intended.
I am using the artwork of FallnAngel–. You can purchase her artwork and a license to use them HERE you MUST have a license to use her work
I am using the artwork of FallnAngel–. You can purchase her artwork and a license to use them HERE you MUST have a license to use her work
I am using the font: Witched
I am using plugins: Alien Eye Candy 3.1 - Glow
I am using Mask #82 from Designs by Vaybs, you can get that here
Pieces of the kit used in this tutorial are
Paper 4
Paper 11
Frame 8
Wands
Sparkles
Ring
Pendant
Bow 2
Dot Swirls 1
You must have working knowledge of PSP to complete this tutorial. This tutorial was written using PSPXII
Open new Canvas 600*600
You must have working knowledge of PSP to complete this tutorial. This tutorial was written using PSPXII
Open new Canvas 600*600
Open paper 4 and resize to 600*600. Paste apply mask and resize to your liking, Merge Group
Open Element 20 c/p to canvas, resize to your liking
Open frame 8, paste, resize to your liking
Open Paper 11, resize to 600*600. Paste under your frame, using your Magic Wand, select the inside of your frame, go to Selections,Modify, Expand, 5 pixels. Select okay, invert selection and delete leaving the inside of the frame with your paper
Take your tube and paste it under the frame, Resize to your liking, select the paper layer with your magic wand, activate your tube layer, delete the bits you don’t want. Apply Luminace Legacy
Paste your full tube layer on top, resize and place to your liking,
Wands, resize and place under the inner tube layers
Sparkles, Resize and Over the top of the frame
Ring , resize and place to your liking
Pendant, Resize and place to your liking
Bow 2, resize and place over the top of the Pendant clasp
Dot Swirls 1, resize and place under the main tube layer
Apply drop shadow to your taste. Mine are all 2*2’s
Resize the signature if needed
The name. Using the Witched size 48 Colors #10270a,Eye Candy 3.1 Glow 5 pixel, fat setting color # #ddd7d9
Drop Shadow to your liking
Add your copyright information and license number before save
FTU Christmas Joy Tut
Any resemblance to any other tutorial or signature is merely coincidental and is not intended.
I am using the artwork of FallnAngel–. You can purchase her artwork and a license to use them HERE you MUST have a license to use her work
I am using the artwork of FallnAngel–. You can purchase her artwork and a license to use them HERE you MUST have a license to use her work
I am using the font: Santa’s Sleigh Full
I am using plugins: Alien Eye Candy 3.1
I am using Daniela’s FTU kit Christmas Joy, which you can download here
Pieces of the kit used in this tutorial are
Paper 2
Paper 8
Frame 4
Element 27
Element 24
Element 22
Element 18
You must have working knowledge of PSP to complete this tutorial. This tutorial was written using PSPXII
Open new Canvas 600*600
Open paper 72 and resize to 600*600. Paste apply mask and resize to your liking, Merge Group
Open Element 20 c/p to canvas, resize to your liking
Open frame4, paste, resize to your liking
Open Paper 8, resize to 600*600. Paste under your frame, using your Magic Wand, select the inside of your frame, go to Selections,Modify, Expand, 5 pixels. Select okay, invert selection and delete leaving the inside of the frame with your paper
Take your tube and paste it under the frame, Resize to your liking, select the paper layer with your magic wand, activate your tube layer, delete the bits you don’t want. Duplicate, original layer apply Guassian Blur set on 3, drop shadow. Duplicate layer set on soft light
Paste your full tube layer on top, resize and place to your liking,
Element 27, resize and place under the inner tube layers
Element 24, Resize and place to your liking
Element 22, , resize and place to your liking
Element 18, Resize and place to your liking
Apply drop shadow to your taste. Mine are all 2*2’s
Resize the signature if needed
The name. Using the Santa’s Sleigh Full size 24 Colors #500800, Candy 3.1 Glow 5 pixel, fat setting color #FFFFF
Drop Shadow to your liking
Add your copyright information and license number before save
Friday, November 25, 2011
PTU Hot Cop TUT
Any resemblance to any other tutorial or signature is merely coincidental and is not intended.
I am using the artwork of Arthur Crowe You can purchase his artwork and a license to use them HERE you MUST have a license to her her work
I am using the artwork of Arthur Crowe You can purchase his artwork and a license to use them HERE you MUST have a license to her her work
I am using the font: 28 Days Later
I am using plugins: Lokas 3-D
Pieces of the kit used in this tutorial are
PP8
PP9
Jaildoor
Bullet hole Spray
Bullets
Evidence label 2
Alcohol
Baton 2
Cuffs1
Brush
You must have working knowledge of PSP to complete this tutorial. This tutorial was written using PSPXII
Open new Canvas 600*600
Open new Canvas 600*600
Open PP8 and resize to 600*600. Paste apply mask and resize to your liking, Merge Group,
Open Jaildoor c/p to canvas, resize to your liking.
Open PP9, resize to 600*600. Paste under the jail door, use your selection tool and go around the outside of the bars, invert selection and delete leaving the inside of the door with your paper.
Take the close up of the tube and put it under the jail door. Use the wand to select the outside of PP9, Invert, Delete, apply Hard Light. Take the full tube and paste it and move it to the right side of the siggy, apply Lokas 3-D
Bullet Hole Spray, resize to your liking and place on top of Mask
Bullets, Resize and set over the bottom of your tube
Evidence label Two, Resize and rotate to your liking, place under bullets to the Right
Alcohol, resize and place on the left side over the jail door
Baton 2, flip, resize and place over the alcohol bottles
Cuffs 1 Resize and place behind the Alcohol bottles
Brush, Resize and place on top of the other elements
Apply drop shadow to your taste. Mine are all 2*2’s
Resize the signature if needed
The name. 28 Days Later size 28 Color #000000, apply Eye Candy 3.1 Glow color FFFFF, Fat, Pixels 3
Drop Shadow to your liking
Add your copyright information and license number before save
Wednesday, November 16, 2011
Tag Showoff featuring Pointsetta Magick
Tuesday, November 15, 2011
New PTU Kit - Pointsetta Magick
Thursday, October 27, 2011
Chef Otelia Cupcake PTU Tut
Any resemblance to any other tutorial or signature is merely coincidental and is not intended.
I am using the artwork of Anna 4X You can purchase his artwork and a license to use them HERE you MUST have a license to her her work
I am using the artwork of Anna 4X You can purchase his artwork and a license to use them HERE you MUST have a license to her her work
I am using Wicked Princess Scraps PTU kit “Chef Otelia” You can purchase that here
I am using the font: Comic San Serf, Civitype
I am using plugins:, Lokas 3D,
Pieces of the kit used in this tutorial are
PP6
PP9
Heart Frame
Bead Splatter
Canister
Chef Hat 2
Chococupcake
Cupcakewhite
Potholder
Licorice
Wooden Spoon
Wisk
Tired Cake
You must have working knowledge of PSP to complete this tutorial. This tutorial was written using PSPXII
Open new Canvas 600*600
You must have working knowledge of PSP to complete this tutorial. This tutorial was written using PSPXII
Open new Canvas 600*600
Open PP6 and resize to 600*600. Paste apply mask and resize to your liking, Merge Group,
Open Heart Frame c/p to canvas, resize to your liking.
Open PP9, resize to 600*600. Paste under your frame, using your Magic Wand, select the inside of your frame, go to Selections, Modify, Expand, 3 pixels. Select okay, invert selection and delete leaving the inside of the frame with your paper.
Take your tube and paste it on top of the frame. Use the wand to select the outside of PP9, and erase the bottom of the tube so it looks like she’s inside the tube. Apply Lokas 3D effect
Bead Splatter, rezsize to your liking and place over the top of the mask
Canister, resize and place over the bottom of the tag, were you erased the bottom of the tube, Duplicate and Mirror. Use The Comic font, color black, size 4 and put the words “Sugar” on one canister plaque, and “Spice” on the other
Chef Hat 2 resize and place to your liking
Chococupcake, resize and place to your liking
Cupcakewhite, resize and place to your liking
Potholder, resize and place to your liking
Licorice, resize,duplicate, and place to your liking
Wooden spoon, Resize and place to your liking
Whisk, Resize and place to your liking
Tired Cake, place under the frame, erase the bits that sticks out. Duplicate, Mirror, set them on either side of the tube
Apply drop shadow to your taste. Mine are all 2*2’s
Resize the signature if needed
The name. Using Civitype size 36 Color #ea5797, drop shadow
Drop Shadow to your liking
Add your copyright information and license number before save
Monday, October 17, 2011
PTU Lobotomy Tut
Any resemblance to any other tutorial or signature is merely coincidental and is not intended.
I am using the artwork of Anna Garrett Blair–. You can purchase his artwork and a license to use them HERE you MUST have a license to her his work
I am using the artwork of Anna Garrett Blair–. You can purchase his artwork and a license to use them HERE you MUST have a license to her his work
I am using the font AtlandsketchesBB and Crazy Milktop Girl
I am using plugins: Lokas 3d Shadow, Alien Eye Candy 3.1 Glow
Pieces of the kit used in this tutorial are
PP12
PP14
Frame3
Chained Heart
Splatter 1
Ball and Chain
Cuffs
Bloody Hand
You must have working knowledge of PSP to complete this tutorial. This tutorial was written using PSPXII
Open new Canvas 600*600
Open PP12 and resize to 600*600. Paste apply mask and resize to your liking, Merge Group,
Open Frame3 c/p to canvas, resize and rotate to your liking.
Open PP14, resize to 600*600. Paste under your frame, using your Magic Wand, select the inside of your frame, go to Selections, Modify, Expand, 3 pixels. Select okay, invert selection and delete leaving the inside of the frame with your paper.
Take your tube and paste it under the frame, I Mirror, Hard light.
Paste your full tube layer on top, resize and place to your liking, Apply Lokas 3-D plug in
Chained Heart, resize and place to your liking
Splatter 1 Resize and place to your liking
Ball and Chain resize and place to your liking
Cuffs, resize and place to your liking
Bloody Hand resize and place to your liking
Apply drop shadow to your taste. Mine are all 2*2’s
Resize the signature if needed
Saying: AtlandsketchesBB 00000 Size 26. Selections, from Vector object. Selections, Modify, Expand 3 pixels. New Raster layer, flood fill with fffff,
The name. Using Crazy Milktop Girl size 16 color 00000. Alien Eye Candy 3.1 Glow. Fat, Pixels 3 color fffff
Drop Shadow to your liking
Add your copyright information and license number before save
Tuesday, October 11, 2011
PTU Tut Smokin
Any resemblance to any other tutorial or signature is merely coincidental and is not intended.
I am using the font
I am using plugins: DBS Flux, Alien Eye Candy 3.1, Alien Skin Xenofex 2.0 Lokas 3-D Shadow,
Pieces of the kit used in this tutorial are
PP7
PP1
Paper 17
Laceframe
Beaded Swirl
Martini Glass
Gem
Champaign Bottle
Bow
Pianokeyswave
You must have working knowledge of PSP to complete this tutorial. This tutorial was written using PSPXII
Open new Canvas 600*600
Open PP7 and resize to 600*600. Paste apply mask and resize to your liking, Merge Group, DBS Flux, Bright Noise, Intensity 27, Mixed
Open Laceframe c/p to canvas, resize to your liking. Alien Eye Candy 3.1, Glow pixels 2, Fat, Color #fffff
Open PP1, resize to 600*600. Paste under your frame, using your Magic Wand, select the inside of your frame, go to Selections, Modify, Expand, 3 pixels. Select okay, invert selection and delete leaving the inside of the frame with your paper. Xenofex, Constellation
Take your tube and paste it under the frame, I used the close up, mirrored and set it to Luminacy Legacy
Paste your full tube layer on top, resize and place to your liking, Apply Lokas 3-D plug in
Beaded Swirl, resize and place to your liking, duplicate and repeat, apply same Xenofex Bright Noise settings
Martini Glass, Resize and place to your liking, use Xenofex on the pink in the glass
Gem, resize and place to your liking
Champaign Bottle, resize and place to your liking
Bottle 01, resize and place to your liking
Bow, resize and place to your liking
Pianowavekeys behind everything else, resize and place to your liking
Apply drop shadow to your taste. Mine are all 2*2’s
Resize the signature if needed
The name. Using Baroque Script size 36 Colors #1d1221,Eye Candy 3.1 Glow 2 pixel, fat setting color #fffff
Drop Shadow to your liking
Add your copyright information and license number before save
Subscribe to:
Posts
(Atom)
MY BLINKIE
Facebook Me
Stores I Sell In
Who I CT For
"
CU Licenses
